Lanuss LSP DL800

The equipment first removes slag on the surface of the workpiece through a set of steel hammer disc brushing stations, then removes large burrs and other slag particles on the surface of the workpiece through a set of abrasive belt stations, and then uses 4 sets of universal sand roller brush combinations to remove the slag on the surface of the workpiece. A rotating sanding roller brush, a combination of sanding roller brushes, high-speed centrifugal grinding, scraping, cutting and filing of the edges of the workpiece and the inner hole, without burrs, does not affect the edge accuracy of the workpiece, the inner hole burrs are removed and the R angle is uniform (R angle size By using different processes and abrasive belts), the dimensional accuracy of the workpiece will not be destroyed through processing. At the same time, the sand belt station and sand rolling station can also run independently:

​

• Sand belt station independently can achieve metal hairline, polishing, peeling, slag and other processing; sand rolling brush independent operation can achieve 360 degrees without dead Angle burr treatment, especially for laser cutting, CNC punching under coated sheet metal parts, not only the burr removed clean, and do not hurt the film, the sheet metal without scratch. Because this equipment uses special soft abrasive wire, only designed for the characteristics of burr, so it is a harmless (in the case of film) sheet metal surface effect of burr equipment, and the special workpiece with superior processing efficiency.

​​

• The conveying system is equipped with strong vacuum negative pressure adsorption fixed workpiece, for 50mm above 50mm workpieces can be realised without tooling through machining, special workpiece can be selected supporting tooling fixed machining. The transmission system frequency conversion without speed control.

​​

• Supporting wet vacuum cleaner, reduce safety risks, efficient treatment of grinding dust, through the top high pressure high flow fan to the grinding dust inhalation dust chamber, through water deposition in water spray dust, dust environmental filtration and absorption, clean air discharged into the atmosphere. For operators to demand a good working environment, recycling and grinding metal powder, to achieve environmental protection production.